BASALTE
0200-12/0202-05
Basalte Sentido KNX 4 Button Switch in Bronze
Product code:
0200-12/0202-05
The Sentido keypad is a four button touch keypad that can be part of a KNX solution total control system. The Sentido keypad is a standard KNX device, which can be programmed using ETS. Touching a touch sensitive area will give a visual feedback by means of lighting up the central RGB Led. The central RGB Led can also be controlled over KNX to provide a visual feedback of statuses. The Led can be used to illuminate the switch in the dark as well. The Sentido keypad uses the patented Multitouch technology. Touching more than one touch sensitive area at the same time activates an additional comfort function.
Description
The Basalte Sentido keypad has 4 touch sensitive areas.
Each of the 4 sensors can have the following action:
- Short Press
- Short and Long Press
When more than one sensor is touched at the same time, the Multitouch function is executed. This function can be used for additional comfort functions. Available functions for Multitouch are:
- Short Press
- Short and Long Press
- Scene Sequencer
- RGB Sequencer
Each Basalte Sentido keypad has a temperature sensor and thermostat function to report the ambient temperature on the KNX bus and regulate heating/ cooling if required.
Handmade in Belgium, Sentido for KNX switches are manufactured and validated under the KNX Standard Protocol
Scope of supply includes KNX Bus coupler electronics and designer cover plate.
Technical Details
Specification
Features
- 2 single touch surfaces
- 1 multi-touch
- Integrated scene sequencer
- Multicolor LED backlight
- Temperature sensor
- Dimensions: 3.15" x 3.15" x 0.31"
- Requires European wall box
- Custom engraving possible
Technical
- Ambient temperature:
- Operation: -5C to 45C
- Storage: -15C to 55C
- Transport: -15C to 55C
- Environment: the device is designed for use up to 2000m above sea level (MSL).
- Max. humidity: 93% relative humidity, no moisture condensation
- Protection class: II
- Type of protection: IP 20
- Certification: CE, KNX
Installation
- Never connect the device to 110 V / 230 V.
- Avoid obstacles which might obstruct the proper mounting of the cover to the switch, such as round headed screws, plastering or textured wall paint.
- Installing a Sentido on a metal wall or a mirror surface might cause the device not to function properly.
- Do not install any device nearby that might cause interference such as fluorescent lights, AC controller, iPad or RF devices.
Properties
Properties
| Technology | KNX |
| Brand | BASALTE |
| Design range | BASALTE Classic |
| Finish | Bronze |
| Switch action | Capacitive Touch |
| Mounting | Flush |
| Back Box | Round European |
| Buttons | 5 |
| Input voltage | KNX Bus (29VDC) |
| HVAC support | Temp Sensing + Regulation |
| Status LED's | RGB value |
| Buscoupler | Not Included |
| IP rating | IP20 |
