KNX Secure IP Gateway

Description

The DIN-KXI is an IP-based KNX interface that allows a 4-Series® control system to communicate with a KNX system. It is capable of addressing and controlling up to 1,000 datapoints and receives power over the KNX bus. The DIN-KXI can also be used as a programming interface for KNX devices using ETS5 or ETS6 software.

KNX Security
The device supports KNX Security (AES-128) which can be enabled using ETS software.

Ethernet Communications
The Ethernet connection allows access to the KNX bus from any point on the LAN. This provides programming and diagnostics without direct access to the DIN-KXI.
 

Local Diagnostics
The buttons and LEDs on the device provide diagnostic data including the operating status and communication errors.

DIN Rail Installation
The 1M (18 mm) wide DIN-KXI snaps onto a standard DIN rail for installation in a wall mount enclosure. Wiring connections are made along the top and bottom, clearly accessible from the front for easy installation and servicing. All setup controls and indicators are positioned on the center front panel.

• 1M wide DIN rail mounting
• Ethernet to KNX interface
• Integrates KNX with a Crestron® control system
• Supports KNXnet/IP Security (AES-128)
• Controls up to 1,000 KNX datapoints
• Up to 8 simultaneous KNXnet/IP Tunneling connections
• Configure using ETS Software
• On-board controls for setup and diagnostics
• Powered via the KNX bus

Technical Details

Documents & Downloads