ZENNIO
ZDI-DLB6
DALIBOX Broadcast 6CH. KNX-DALI Broadcast Interface for up to 6 channels with up to 20 ballasts each
Product code:
ZDIDLB6
KNX Interface to control up to 6 channels of up to 20 ballasts with broadcast commands, with the possibility to control up to 10 scenes/sequences for each channel. It allows manual control and status indicator LEDs for each channel.
Description
- Control of up to 20 DALI ballasts per channel in up to 6 channels.
- Ballast replacement allowed with automatic detection.
- Error detection and monitoring (except multiaddress DALI ballasts).
- Burn-in, Stand-by and Auto-off functionality for each channel.
- Not suitable for emergency lighting control.
- Manual control through buttons and status LED indicators.
- 110/230V 50/60Hz external power supply required.
- Total data saving on power failure.
- KNX BCU integrated.
- Size 67 x 90 x 80mm (40.5 DIN units).
- DIN rail unit assembly (EN 50022), with snap fit clamp.
- DALI Standard compatible.
- CE directives compliant.
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 7mA @ 29VDC
- External power supply: 110/230VAC (50 or 60Hz)
- External supply consumption: 150mA
- Fuse protection of supply to DALI power source
- Voltage: 250V
- Current: 4A
- Response type: F (Fast acting)
- Operating temperature: 0 ¡C to 45 ¡C
- Assembly: To be mounted inside distribution boxes or electrical panels with DIN rail.
- Power failure response: Data saving
- Operation Indicator: Programming LED indicates programming mode (red) and test mode (green). Each DALI channel LED indicates its status (flashing = error, fixed = active output). Power supply LED indicates the presence of supply voltage.
Inputs
- Fuse protection of supply to DALI power source
- Voltage: 250V
- Current: 4A
- Response type: F (Fast acting)
Outputs
- Number of channels: 6
- Channel type: DALI Bus
- Channel voltage: 16VDC SELV
- Maximum current per output: 40mA
- Maximum DALI ballasts per channel: 20
- Maximum length of cable: 300m using 10.5mm2
- Short-circuit protection: Yes
- Overload protection: Yes
- Over-voltage protection: Yes
- Connection method: Cable screw terminal
- Cable cross-section: 0.5mm2 to 2,5mm2 (26-12 AWG)
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Dimming Type | DALI |
| Mounting | DIN Rail |
| Outputs | 6 |
| IP rating | IP20 |
| Mounting Width | 4.5MW |
