Mini-Sewi KNX L-Pr - KNX Presence Detector with Brightness Sensor
All measurement values can be used for the control of limit-dependent switching outputs. States can be linked via AND logic gates and OR logic gates.
Description
- Brightness measurement with brightness control
- Presence of persons is detected
- Threshold values can be adjusted per parameter or via communication objects
- 4 AND and 4 OR logic gates, each with 4 inputs. All switching events as well as 16 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output of each gate can be configured optionally as 1-bit or 2 x 8-bit
- Configuration is made using the KNX software ETS.
Technical Details
Specification
General
Housing: Plastic
Colour: White matt
Assembly: Surface, ceiling installation
Dimensions Ø x height: approx. 51 mm x approx. 19 mm
Degree of protection: IP 30
Weight: approx. 20 g
Ambient temperature: -20…+60°C
Ambient humidity: 5...95% RH, non-condensing
Storage temperature: -30…+70°C
KNX bus
KNX medium: TP1-256
Configuration mode: S-Mode
Group addresses: max. 254
Assignments: max. 254
Communication objects: 122
Nominal voltage KNX: 30 V DC SELV
Power consumption KNX: max. 10 mA
Connection: KNX plug terminals
Duration after bus voltage restoration until data is received: approx. 5 seconds
Brightness sensor
Measurement range: 0 lux … 2,000 lux (higher values can be measured and output)
Resolution: 1 lux at 0…2,000 lux
Presence sensor
Coverage angle: approx. 94° × 82° (see also Coverage area of the presence detector)
Range: approx. 5 m
Properties
Properties
| Technology | KNX |
| Brand | ELSNER |
