KNX T-UP gl - KNX Temperature Sensor, pure white RAL 9010
The KNX T-UP gl provides adjustable threshold values. The threshold value outputs and further communication objects can be linked by AND and OR logic gates. Additionally, an integrated actuating variable comparator can compare and output values that are received via communication objects. The sensor has integrated PI controller for a heating/cooling system.
Description
- Measurement of temperature
- Mixed values from own measured value and external values (proportions can be set in percentage)
- PI controller for heating (one or two step) and cooling (one or two step) depending on temperature. Control according to separate target values or basic target temperature
- Threshold values can be adjusted per parameter or via communication objects: 3 × temperature
- 4 AND and 4 OR logic gates with each 4 inputs. Every switching incident as well as 16 logic inputs in the form of communication objects, may be used as inputs for the logic gates. The output of each gate may optionally be configured as 1 bit or 2 x 8 bits
- 2 actuating variable comparators for output of minimum, maximum or average values. Each with 5 inputs (for values received via communication objects)
- Configuration is made using the KNX software ETS 5
Technical Details
Specification
Housing: ABS plastic material
Mounting: In-wall (wall mounting in socket Ø 60 mm, 42 mm deep, resp. cavity wall socket for hole Ø 68 mm)
Protection category: IP 20
Dimensions: Housing approx. 55 x 55 (W x H, mm), mounting depth approx. 8 mm, base plate approx. 71 x 71 (W x H, mm)
Total weight: approx. 50 g
Ambient temperature: Operation 0…+50°C, storage -10…+60°C
Ambient air humidity: max. 95% RH, avoid bedewing
Operating voltage: KNX bus voltage
Bus current: max. 10 mA
Data output: KNX +/- bus terminal plug
Communication objects: 152
Temperature measurement range: 0…+50°C
Properties
Properties
| Technology | KNX |
| Brand | ELSNER |
