KNX eTR M2, signal 2-gang Push Button with Temperature Sensor, jet black RAL 9005
A temperature sensor is integrated into KNX eTR M. An external temperature reading can be received via the bus and processed with its own data to create a total temperature (mixed value).
Communication objects can be connected by AND and OR logic gates.
Description
Features:
- 2 Touch bus button, can be configured as switch, selector switch, dimmer, for operating drives, as 8 or 16-bit encoder or for scenario recall/storage
- Area function when touching both push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
- One LED per touch area. On for object value = 1 / Off for object value = 0, On after pressing button for settable time or always off. Settable, as to whether LED flashes at block object value = 1
- Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage)
- 2 AND and 2 OR logic gates each with 4 inputs. 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit
Technical Details
Specification
Casing: Genuine glass, plastic
Installation: on-wall (directly or with a socket Ø 60 mm, resp. cavity wall socket for hole Ø 68 mm)
Degree of protection: IP 10
Dimensions: housing approx. 81,5 x 81,5 (W x H, mm), mounting depth approx. 12 mm
Total weight: approx. 70 g
Ambient temperature: Operating 0…+55°C, storage -30…+85°C
Ambient humidity: 5...95% RH, avoid condensation
Operating voltage: KNX bus voltage
Bus current: max. 10 mA
Data output: KNX +/- Bus plug-in terminal
Group addresses: max. 183
Allocations: max. 183
Communication objects: 55
Temperature measurement range: 0…+55°C
Temperature resolution: 0.1°C
Properties
Properties
| Technology | KNX |
| Brand | ELSNER |
