KNX eTR MultiTouch Light/Sunblind Button for Light, Solar Protection, Temperature, white RAL9003

Description

• Operating zone for light with 3 areas (switching and dimming)
• Operating zone for blinds, awnings, shutters or windows with 3 areas (up/ down with short/long distinction, driving position)
• Operating zone for temperature control with 3 areas (warmer, cooler, changeover heating/cooling)
• A total of 9 areas, all of which can be assigned either to the intended bus functions or to other individual bus functions (switches, changeover switches, dimmers, blinds, awnings, shutters, windows, 8- or 16-bit encoders, scene call/saving)
• LEDs can be set. All LEDs Off, all LEDs On, active LEDs Always On, all LEDs On for specific time after button pressed, active LEDs On for specific time after button pressed. Settable, as to whether LED flashes at block object value = 1. LED brightness can be pre-set for day and night
• Area function when touching two or more push buttons. Can be configured as switch, selector switch, as 8 or 16 bit encoder or for scenario recall
• Scene control. 3 scene channels with 5 objects each
• Temperature measurements. Mixed value from own measured value and external values (proportion can be set by percentage), output of minimum and maximum values
• PI-controller for heating (one or two-level) and cooling (one or two-level) according to temperature. Regulation according to separate setpoints or basic setpoint temperature
• 4 AND and 4 OR logic gates each with 4 inputs. All switching events as well as 8 logic inputs (in the form of communications objects) can be used as inputs for the logic gates. The output from each gate can be configured optionally as 1-bit or 2 x 8-bit

Configuration is made using the KNX software ETS 5.

Technical Details