Mitsubishi Heavy Industries VRF with KNX, Serial and IP support - 64 Indoor/12 Outdoor Units
Description
FEATURES
- UL Certified.
- Direct access to outdoor unit’s communication bus.
- Scan: Automatic identification of the units presents in the VRF system.
- Outdoor unit’s signals available for the integration.
- Integration with any IP Home Automation System thanks to our open ASCII protocol.
- Compatible with the drivers available at Intesis webpage.
- Direct ethernet connection to the home’s local IP network.
- Up to 6 TCP clients (incoming sockets) are supported
- Configuration through IP or USB (Console) port.
- Easy integration with Intesis MAPS.
- Automatic updates for both Intesis MAPS and interface’s firmware.
DIRECT CONNECTION TO VRF OUTDOOR UNITS
The gateway is directly connected to the outdoor unit's communication bus and enables the control of all the indoor units connected to the system. This allows not only the control and monitoring of the main AC functions but the access to some internal variables of the outdoor units.
EASY TO SET UP BY INTESIS MAP
The configuration is carried out using the Intesis MAPS software. This one allows you to define your own settings for the device and offers extra functions available for all the new generation gateways. Thanks to the scan function, which allows to automatically discover all the units available in the installation, get the interface ready to work in a really short time.
Intesis MAPS makes it easy to identify any malfunction in the installations thanks to its robust diagnostic feature.
Technical Details
Specification
Case:
Plastic, type PC (UL 94 V-0). Color: Light Grey. RAL 7035
Net dimensions (dxwxh): 90x106x58 mm / 3.5x4.2x2.3"
Recommended space for installation (dxwxh): 130x115x100 mm / 5.1x4.5x3.9"
Mounting:
Wall: M3 25mm (1") length screws. Secure mounting: below 2 meters (6 feet) DIN rail (recommended mounting) EN60715 TH35
Wires (for power supply and low- voltage signals):
Solid wires or stranded wires (twisted or with ferrule) Per terminal:
1 core: 0.5 to 2.5mm2 (24 to 11 AWG) 2 cores: 0.5 to 1.5mm2 (24 to 15 AWG) 3 cores: not permitted
For distances longer than 3.05 meters (10 feet), use class 2 cables
Power:
1 x Green pluggable terminal block (3 poles) 12 to 36 VDC +/-10%, Max.: 250 mA
24 VAC +/-10% 50-60 Hz, Max.: 127 mA Recommended: 24 VDC
Ethernet: 1 x Ethernet 10/100 Mbps RJ45
Port EIA 485:
1 x Green pluggable terminal block (3 poles)
SGND (Reference ground or shield) 1500VDC isolation from other ports
Port KNX: 1 x Orange pluggable terminal block (2 poles): A, B
AC Ports:
AC-Port A (serial, 2 poles): Not used
AC-Port B (serial, 3 poles): Not used
AC-Port C: (serial, 3 poles): AC bus connection (Superlink)
LEDs:
2 x Run (Power/Error) 2 x Port EIA-485 TX/RX 2 x Port KNX TX/TR
1 x Button indicator
2 x Ethernet Link/Speed 2 x AC-Port A TX/RX
2 x AC-Port B TX/RX
2 x AC-Port C TX/RX
Binary inputs:
1 x Green pluggable terminal block (4 poles)
I1, I2, I3, and Common
1500 VDC isolation from other ports
Console port:
USB Mini-B type 2.0 compliant 1500 VDC isolation
SW A SW B:
2 x DIP switch blocks for EIA-485 serial port configuration:
Position 1:
On: 120 Ω termination active Off: 120 Ω termination inactive
Position 2 and 3:
On: Polarization active Off: Polarization inactive
Operational temperature: Celsius: 0 .. 60°C Fahrenheit: 32 .. 140oF
Operational humidity: 5 to 95%. No condensation
Protection: IP20 (IEC60529).
Properties
Properties
| Technology | KNX |
| Brand | INTESIS |
| Mounting | DIN Rail |
| IP rating | IP20 |
| Mounting Width | 8MW |
