HDL M/AG40B.1

KNX Blinds Motor 220V AC

Product code: M/AG40B.1

KNX Blinds Motor 220V AC controls the roller blind travel up/down, travel up/down to a specified percentage position by receiving a KNX signal.

Automatic travel measurement and supports limit point presetting.
Enable to control the curtain travel up/down, stop and percentage up/down, and supports status response (travel up/down, stop, percentage up/down, etc.)
Enable short drag to start the motor.
The rotate direction of the motor can be set to forward or reverse.
Preset position function, a total of 4 preset positions available.
Safety control: Control the curtain position according to wind, rain, frost signal, and supports the power-on status recovery after power failure.
Auto control: Control the curtain position according to the weather status, heating, cooling signal.
Scene control function.
Forced position operation.
Power-down save function.
Overheat protection.

Working voltage: 21-30V DC

Working current: 6mA/30V DC

Communication: KNX

Rated input voltage: AC220-240V (50Hz)

Rated input current: 0.9A

Cable diameter of KNX terminal: 0.6-0.8mm

Motor rotate torque: 3N.m

Motor rotate speed: 22rpm

Working temperature: -5C~45C

Working relative humidity: 90%

Storage temperature: -20C~60C

Storage relative humidity: 93%

Dimensions: 35x528(mm) (See Figure 3-Figure 5)

Net weight: 1224g (Motor) + 20g (Communication module)

Housing material: Steel (Motor) + retardant-frame PC (Communication module)

Installation: Wall hanging

Insulation rating: E

Work system: S2-3min

Protection rating (Compliant with EN 60529): IP44

Technology	KNX
Brand	HDL