HDL
M/FCHC.4.1
KNX FCHC Actuator, Din Rail Mount
Product code:
M/FCHC.4.1
KNX FCHC Actuator adopts KNX/EIB communication and is used for controlling air conditioner, fan, compressor and floor heating. The module function is set via ETS software and can work in conjunctions with different panels. And up to 6 digital temperature sensors can be connected.
Description
- Multiple control objects: HVAC, Fan, Compressor, Floor heating, one control mode for each control target.
- Control modes: HVAC mode, Fan mode, Compressor mode and Floor heating mode.
- Active control and passive control: More flexible to work in conjunction with different panels. When in active control mode, this module can work in conjunction with panels without PI algorithm such as HDL-M/DLP04.1. When in passive control mode, this module can work in conjunction with panels with algorithm such as Siemens 5WG1.
- Local temperature detection and limit temperature alarm. When the local temperature is too high or too low, the module will send an alarm signal to the bus. This module can connect to up to 6 temperature sensors.
- Supports power-on control mode status settings: Unchanged, Comfort mode, Standby mode, Economy mode, Frost/heat protection.
- Independent temperature measurement and monitoring is supported in all active modes.
- Supports online upgrades.
Technical Details
Specification
Working voltage: 21~30V DC
Working current: 20mA/30V DC
Input voltage: AC100-240V (50/60Hz)
Output current: 8A (AC), 5A (DC)
Communication: KNX
Cable diameter of KNX terminal: 0.6 d 0.8mm
Temperature sensor: Digital temperature sensor (TS/C1.0)
Working temperature: -5C~45C
Working relative humidity: 90%
Storage temperature: -20C~60C
Storage relative humidity: 93%
Dimensions: 90x72x64mm
Net weight: 168g
Housing material: Frame-retardant nylon
Installation: 35mm DIN rail installation
Protection rating (Compliant with EN 60529): IP20
Properties
Properties
| Technology | KNX |
| Brand | HDL |
| Mounting | DIN Rail |
| Mounting Width | 4MW |
