KNX - 4-way C load switching actuator FIX1
Description
- 4-way C load switching actuator FIX1
- With current recognition
- For higher lamp loads
- LED switching status display for each channel
- Manual operation on device (even without bus connection)
- Adjustable characteristics: e.g. switching, delayed switching, pulse function
- Links, type of contact (NC contact/NO contact) and participation in central commands such as continuous On, continuous Off, central switching and save/call up scene
- Switching functions: On/Off, pulse, On/Off delay, staircase light with warning
- Logical links: e.g. lock, AND, release, OR
Technical Details
Specification
Operating voltage KNX: Bus voltage, ≤4 mA
Installation type: DIN rail
Width: 4 modules
Type of connection: Terminal screws | Bus connection: KNX bus terminal
Max. cable cross section: Solid wire: 0.5 mm² (Ø 0.8) to 6 mm² | Stranded wire with end sleeve: 0.5 mm² to 4 mm²
Number of channels: 4
Type of contact: NO contact, 16 A, 10 A
Opening width: < 3 mm
Resistive load: 3680 W
Energy saving lamps: 410 W
LED lamp < 2 W: 75 W
LED lamp 2-8 W: 850 W
LED lamp > 8 W: 850 W
Inrush current: max. 1500 A / 200 µs
Switching of various phases: Possible
C load: Yes
Type: Module FIX1
Ambient temperature: -5°C ... 45°C
Type of protection: IP 20
Protection class: II according to EN 60 669
Operating voltage: 110 – 240 V AC 50 – 60 Hz
Frequency: 50 – 60 Hz
Stand-by consumption: ~1.3 W
Incandescent/halogen lamp load: 2600 W
Fluorescent lamp load (conventional) parallel-corrected: 2000 W (200 µF)
Fluorescent lamp load (electronic ballast): 1650 W
Voltage output: 240 V AC
Switching output: Potential-free
Suitable for SELV: Yes if all channels switch at SELV
Capacitive load: 200 µF
Accuracy current measurement: I > 1 A: ± 8 % of measured value; I < 1 A: ± 100 mA; lowest measurable value: 150 mA
Properties
Properties
| Technology | KNX |
| Brand | THEBEN |
| Outputs | 4 |
| Output Voltage | 230V |
| Output Rating | 16A |
