IR Quattro Slim KNX Presence Detector V3.1
Description
Extremely slim. Incredibly sensitive.
Modern buildings are planned down to the very last detail both in technical terms as well as from a design perspective. This should also apply to the sensors that are fitted in them. Thanks to its minimal installed height of just 4 mm, the IR Quattro SLIM fits perfectly into any ceiling structure. Its detection performance is all the more astonishing: installed at a height of up to a maximum 4 metres, the world's only retina lens has a genuine presence detection zone of an astounding 16 m². Where no movement escapes the sensor. Despite its slimline design.
Technical Details
Specification
European Article Number (EAN): 4007841008888
Dimensions: 77 x 77 x 60 mm
Model: Presence detector
Sensor type: Passive infrared
Power supply: KNX bus voltage
Recommended installation height: 2.5-4,00 m
Sensor system: PIR with retina lens and hexagonal Fresnel structure
Can be connected in parallel: Yes
Application: inside buildings
Installation: Ceiling
Settings: by means of ETS software, remote control or bus
Square presence detection zone: 4 x 4 m max. (16m²)
Square radial detection zone: 4 x 4 m max. (16m²)
Square tangential detection zone: 4 x 4 m max. (16m²)
Lighting channels Light 1 – Light 4: Switching/dimming, switching mode, constant lighting control, stay-ON time
Basic brightness: Permanently ON, 1 – 255 min, 10-50% = all night
Switch-'ON' delay: Room surveillance, 0-255 min., Stay-ON time 1-255 min.
Presence stay "ON" time output: 1-255 sec. or 1-255 min.
HVAC output: depending on presence
Further outputs: Light level, sabotage protection
Light level output: in lux
IP rating: IP20
Protection class: II
Temperature range: 0-+40
IQ mode: Yes
Model: KNX
Properties
Properties
| Technology | KNX |
| Brand | STEINEL |
| Finish | White |
| Buscoupler | Integrated |
| IP rating | IP20 |
