PlanoSpot 360 KNX Passive infra-red presence detector

Description

• Automatic presence- and brightness-dependent control for lighting and HVAC
• Two differently sized detection zones for greater flexibility. Adjustable via parameters or remote control.
• Manual alignment of the detection area (swivel mechanism)
• Mixed light measurement suitable for fluorescent lamps (FL/PL/ESL), halogen/incandescent lamps and LEDs 
• 3 directed light measurements
• 2 light channels C1, C2 with 2 light measurements and additional lighting channel C3 without brightness factor
• Switched or constant light control with 2 independent control systems and standby function (orientation light)
• Switching mode with dimmable lighting
• Fully or semi-automatic
• Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
• Teach-in of the brightness switching value or the set point value
• Light time delay configurable
• Self-learning time delay can be set using parameters, object or via remote control
• Reduction of time delay when present briefly (short-term presence)
• Manual override by telegram or remote control
• 2 presence channels C4, C5, individually configurable
• Switch-on delay and time delay configurable
• Room monitoring with selective movement detection
• Setting the room correction factor for brightness measurement comparison
• Configurable sensitivity 
• Extremely simple setting of the energy-saving ratio with the new "eco plus" function
• Test mode for checking function and detection area
• Scenarios
• Parallel switching of multiple presence detectors (Master/Slave or Master/Master)
• Installation in false ceilings with springs
• Surface mounting on ceilings possible with the AP-frame (optional)
• User remote control "theSenda S" (optional)
• Management remote control "SendoPro" (optional)
• Installation remote control "theSenda P" (optional)

Technical Details