ZoningBOX 6. Zoning ducted air-conditioning actuator for up to 6 zones
Description
Actuator for DIN rail (40.5 units) for air conditioning climate systems with zoning. It controls motorized 12/24VDC grilles in up to 6 zones (up to 2 grilles per zone). Temperature management in up to 12 zones with additional ZoningBOX 4/6 modules to activate the additional zones. Management of settings for the air conditioning climate systems (up to two units): on/off, setpoint, mode, fan speed, according to the zones enabled. Manual control of outputs and LED indicators of movement of the grilles.
Features
_ 6 outputs for 12 or 24V motorised grilles*.
_ Zoning module allowing the control of up to 12 zones and up to
2 zone groups.
_ Total data saving on power failure.
_ Manual control through buttons and status indicator LED.
_ 230V supply required for feeding of the 6 outputs.
_ KNX BCU integrated.
_ Size 67 x 90 x 80 mm (4.5 DIN units).
_ DIN rail unit assembly (EN 50022), with snap fit clamp.
_ CE directives compliant (CE-mark on the right side).
* Before connecting the device to the facility, it must be assured that the switch position
agree with the grilles voltage.
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 6mA @ 29VDC
- External power supply: 230VAC 50/60HZ
- Operating temperature: 0 ¡C to 45 ¡C
- Assembly: Independent device to be mounted inside electrical panels with DIN rail (EN 50022)
- Bus power failure response: Data saving
- Response when restarting bus: Data recovery
- Programming/internal test LED indicates: Programming LED indicates programming mode (red) and test mode (green). Power indicator LED (green) represents correct feeding. Each output LED indicates its status (fixed = open grille/dumper; off = closed grilled/dumper; flashing = error)
External Power Supply Specifications and Connections
- Voltage: 250VAC
- Current: 4A
- Fuse: (F) Fast Acting
- Connection method: Screw terminal block
- Cable cross-section: 0.2mm2 to 4mm2 (32-10 AWG)
Outputs
- Number of Outputs: 6
- Output Voltage: 12VDC or 24VDC (Selectable)
- Output Type: Solid state switching device
- Maximum grilles per output: 2
- Maximum current per output (RMS): 750mA
- Shortcut protection: Yes
- Overloading protection: Yes
- Connection method: Cable screw terminal
- Cable cross-section: 0.2mm2 to 4mm2 (26-10 AWG)
Properties
Properties
Technology | KNX |
Brand | ZENNIO |
Mounting | DIN Rail |
Outputs | 6 |