ZENNIO
ZDIDLB6V2
DALIBOX Broadcast 6CH. KNX-DALI Broadcast Interface for up to 6 channels with up to 64 ballasts each
Product code:
ZDIDLB6V2
KNX-DALI broadcast interface module for DIN rail mounting (4.5 units). It incorporates 6 channels controlled via broadcast commands, allowing a total of 64 ballasts per channel, including color ballasts (DT8). In addition, it allows the configuration of 20 scenes/sequences per channel. It is compatible with KNX Secure. It enables manual control and has LED status indicators per channel.
Description
- Control of 6 channels with up to 64 DALI ballasts per channel
- Single Master DALI-2 Controller
- Compatibility with color ballasts (DT8)
- Supports KNX Data Secure
- Ballast replacement allowed with automatic detection
- Error detection and monitoring (except multiaddress DALI ballasts)
- Burn-in, Stand-by and Auto-off functionality for each channel
- Optional manual dimming control
- External 110-240 VAC 50/60 Hz power supply
- Total data saving on KNX bus failure
- Integrated KNX BCU (TP1-256)
- Dimensions 67 x 90 x 79 mm (4.5 DIN units)
- DIN rail mounting according to IEC 60715 TH35, with fixing clamp
- DALI Standard certified according to IEC 62386
- Conformity with the CE, UKCA, RCM directives (marks on the right side)
Technical Details
Specification
General System Specifications
- KNX Power Supply: 29VDC
- KNX Current Consumption: 7mA @ 29VDC
- External power supply: 110/230VAC (50 or 60Hz)
- External supply consumption: 150mA
- Fuse protection of supply to DALI power source
- Voltage: 250V
- Current: 4A
- Response type: F (Fast acting)
- Operating temperature: 0C to 45C
- Assembly: To be mounted inside distribution boxes or electrical panels with DIN rail.
- Power failure response: Data saving
- Operation Indicator: Programming LED indicates programming mode (red) and test mode (green). Each DALI channel LED indicates its status (flashing = error, fixed = active output). Power supply LED indicates the presence of supply voltage.
Inputs
- Fuse protection of supply to DALI power source
- Voltage: 250V
- Current: 4A
- Response type: F (Fast acting)
Outputs
- Number of channels: 6
- Channel type: DALI Bus
- Channel voltage: 18VDC FELV
- Maximum current per output: 250mA
- Maximum DALI ballasts per channel: 64
- Maximum length of cable: 300m using 10.5mm2
- Short-circuit protection: Yes
- Overload protection: Yes
- Over-voltage protection: Yes
- Connection method: Cable screw terminal
- Cable cross-section: 0.5mm2 to 2,5mm2 (26-12 AWG).
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Dimming Type | DALI |
| Mounting | DIN Rail |
| Outputs | 6 |
| IP rating | IP20 |
| Mounting Width | 4.5MW |
| KNX Secure | Yes |
