MAXinBOX 88. KNX multifunction actuator with KNX Secure - 8 outputs 16 A / 8 inputs A/D
ZENNIO ZIO-MB88

MAXinBOX 88. KNX multifunction actuator with KNX Secure - 8 outputs 16 A / 8 inputs A/D

Product code: ZIOMB88
Multifunction sensor-actuator for DIN-rail (4 units) with 8 outputs (16 A C-load) which offer multiple configurations as shutter channels or individual outputs. It allows manual control of its outputs through the push buttons on the cover. It includes 10 independent logical functions. In addition, it incorporates 8 analog/digital inputs that may be configured as binary inputs for sensors and potential free push buttons, as temperature probe inputs or as motion sensor inputs. Four room thermostats to control heating/cooling systems are included. It is compatible with KNX Secure. Accessories: temperature probe and motion sensor.
Price (Excluding GST)
$P.O.A

Description

  • 8 configurable outputs: shutter channels (up to 4), individual outputs (up to 8) and 2-pipe fan coil control (up to 2)
  • Outputs suitable for capacitive loads, maximum 140 μF
  • Supports KNX Data Secure
  • 8 analog/digital inputs
  • 2 Master Light controls
  • Manual output operation with push button and LED status indicator
  • 10 logic functions
  • Output timing
  • Total data saving on KNX bus failure
  • Integrated KNX BCU (TP1-256)
  • Dimensions 67 x 90 x 70 mm (4 DIN units)
  • DIN rail mounting according to IEC 60715 TH35, with fixing clamp
  • Possibility of connecting different phases in adjacent outputs
  • Conformity with the CE, UKCA, RCM directives (marks on the right side)

Technical Details

Specification

KNX supply:
Voltage (typical): 29 VDC SELV
Voltage range: 21-31 VDC
Maximum consumption Voltage: 29 VDC (typical) 4.85mA, 140.7mW. 24 VDC1 10mW, 240mW.
Connection type: Typical TP1 bus connector for 0.8 mm Ø rigid cable


External power supply:  Not required
Operation temperature: 0 .. +55 °C
Storage temperature: -20 .. +55 °C
Operation humidity: 5 .. 95%
Storage humidity: 5 .. 95%
Complementary characteristics: Class B
Protection class / Overvoltage category: II / III (4000 V)
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Degree of protection / Pollution degree: IP20 / 2 (clean environment)
Installation: Independent device to be mounted inside electrical panels with DIN rail (IEC 60715)
Minimum clearances: Not required
Response on KNX bus failure: Data saving according to parameterization
Response on KNX bus restart: Data recovery according to parameterization
Operation indicator: The programming LED indicates programming mode (red) and test mode (green). Each output LED indicates its status
Weight: 334 g
PCB CTI index: 175 V
Housing material / Ball pressure test temperature: PC FR V0 halogen free / 75 °C (housing) - 125 °C (connectors). 

Properties

Properties

Technology KNX
Brand ZENNIO
Mounting DIN Rail
Inputs 8
Outputs 8
IP rating IP20
Mounting Width 4MW
KNX Secure Yes

Documents & Downloads

More product information from ZENNIO
Ivory Egg uses cookies to make your experience better and provide necessary site functionality. By using our website, you agree to set the cookies and accept the privacy policy