KUPSupply 160mA. KNX Universal power supply 160mA plus 29VDC ancillary power supply
Description
- 160mA KNX power supply with 29VDC auxiliary output
- 110-240VAC 50/60Hz power input
- Nominal output current: 160mA on KNX bus and 250mA total (KNX+Aux)
- Power generation for the KNX system (with LED indicator)
- Short-circuit and overvoltage protection
- Reset button and overload status LED
- KNX coil included
- Dimensions 67 x 90 x 35mm (2 DIN units)
- DIN rail mounting (EN 50022), with fixing clamp
- Conformity with the CE directives (CE-mark on the right side)
Technical Details
Specification
External power supply
Voltage: 110-240VAC 50/60Hz
Maximum consumption: 150mA@110VAC / 80mA@230VAC
KNX supply
Voltage (typical): 29VDC SELV (with KNX coil)
Maximum rated current (IBUS): 160mA
Connection type: Typical TP1 bus connector for 0.80mm Ø rigid cable
Operation temperature: 0°C .. +55°C
Storage temperature: -20°C .. +55°C
Operation humidity: 5 .. 95%
Storage humidity: 5 .. 95%
Protection class / Overvoltage category: II / III (4000V)
Operation type: Continuous operation
Device action type: Type 1
Electrical stress period: Long
Complementary characteristics: Class B
Degree of protection / Pollution degree: IP20 / 2 (clean environment)
Installation: Independent device to be mounted inside electrical panels with DIN rail (EN 50022)
Minimum clearances: Not required
Power failure back-up time: 100ms
Maximum current before overload notification: 300mA
Weight: 138g
PCB CTI index: 175V
Housing material: PC FR V0 halogen free.
Properties
Properties
| Technology | KNX |
| Brand | ZENNIO |
| Mounting | DIN Rail |
| Output Rating | 160mA |
| IP rating | IP20 |
| Mounting Width | 2MW |
