Fujitsu VRF systems to KNX Application - 4 indoor units
Description
KNX standard datapoints (DPTs) support
KNX standard datapoints (DPTs) are supported, guaranteeing a simple KNX device/system integration.
Direct access to the outdoor unit
Connection is simple, as the interface connects directly to the outdoor unit’s communication bus.
Automatic identification
A scan function is available for automatic identification of the units present in the VRF system.
Outdoor unit signals
Signals assigned to the outdoor unit are available to be used in the integration.
Individual indoor unit energy consumption signals
Energy consumption signals from each indoor unit are available, so they can be checked individually.
Datapoint support
A wide range of monitoring and control datapoints is available.
Commissioning-friendly approach with Intesis MAPS
Templates can be imported and reused as often as needed, significantly reducing commissioning time.
Configuration tool and interface automatic updates
Both the Intesis MAPS configuration tool and the interface's firmware can receive automatic updates.
This bidirectional gateway connects to the Fujitsu outdoor unit’s X1/X2 bus to monitor and control up to 4 indoor units individually.
Thanks to its “late configuration” feature, this bidirectional gateway can be configured with Intesis MAPS to select among one of these four (4) protocols to integrate the Panasonic AC units into:
- BACnet (IP or MS/TP)
- Modbus (TCP & RTU)
- KNX IP
- WMP (the Intesis ASCII based protocol for IP-base Home Automation systems)
Scan the network to detect the Fujitsu outdoor and indoor units connected to the bus (check the gateway’s user manual for additional information).
Configuration tool: Intesis MAPS.
Certifications: UL, BTL, UKPSTI, UKCA, EC Declaration of Conformity
Technical Details
Properties
Properties
| Technology | KNX |
| Brand | INTESIS |
| Mounting | DIN Rail |
| IP rating | IP20 |
| Mounting Width | 8MW |
